When new courses are introduced to the curriculum, old courses may be phased out. You can check your UNSW Engineering school below to determine if there are any transitional arrangements and changes that will affect you.
DESN1000 & ENGG1000
From 2022 onwards, ENGG1000 will be renamed to DESN1000. Students who were required to complete ENGG1000 and have not taken the course must complete DESN1000. If you have taken ENGG1000 already, you are not required to complete DESN1000.
- Biomedical Engineering
- Chemical Engineering
- Civil Engineering
- Computer Science and Engineering
- Electrical Engineering and Telecommunications
- Mechanical and Manufacturing Engineering
-
Specialisation
Course
Comments
Effective from
ENGG3060
This course contains the same content as BIOM9551 Biomechanics of Physical Rehabilitation. ENGG3060 can be counted as BIOM9551 in BIOMXXXX plans
T1 2020 onwards
You will not be permitted to take Engineering Design and Professional Practice (DESN2000) for the Biomedical Engineering (BIOMDS) specialisation. However, the requirements for the BE (Hons) component will depend on the specialisation chosen - consult the relevant School section in this table for details.
-
Stream
Old course
New course
Effective from
Chemistry 1A: Atoms, Molecules and Energy (CHEM1011) or Higher Chemistry 1B (Medicinal: Elements, Compounds and Life (CHEM1031)
S1 2017
Chemistry 1B: Elements, Compounds and Life (CHEM1021) or Higher Chemistry 1B: Elements, Compounds & Life (CHEM1041)
S1 2017
T1 2021
T1 2021
If you have already completed CEIC2004 (for CEICAH students) or CEIC3005 (for CEICDH students), ignore DESN2000. Otherwise, enrol in DESN2000 in T2 from 2021 onwards.
From 2022 onwards, the FOODJH Food Science and Technology and FOODKH Food Science and Nutrition stream requirements were revised. Students who started in 2021 or earlier will continue to follow the Handbook requirements for the year they commenced their degree, while students who start from 2022 onwards must follow the new requirements. Please refer to the relevant Handbook entries for program/stream information.Should you require any enrolment assistance, or wish to transfer to the new stream requirements, please contact your Academic Advisor.
-
Stream
Old requirement
New requirement
Effective from
Students are not permitted to complete Engineering Design and Professional Practice (DESN2000)
Sustainable Transport and Highway Engineering (CVEN2401) or Soil Mechanics (CVEN3202)
T1 2020 onwards
Students are not permitted to complete Engineering Design and Professional Practice (DESN2000)
Civil and Environmental Engineering Practice (CVEN3031) or Fundamentals of Humanitarian Engineering (ENGG3001)
T1 2020 onwards
Civil and Environmental Engineering Practice (CVEN3031) or Fundamentals of Humanitarian Engineering (ENGG3001)
T1 2020 onwards
*From 2021 onward, CVEN2401 will be replaced by CVEN3401, please ensure you enrol according to your situation as per the table below:
Sustainable Transport & Highway Engineering (CVEN2401) Completed?
Civil & Environmental Engineering (CVEN3031) Completed?
Courses left to complete
Yes
Yes
No changes
Yes
No
2020: Civil and Environmental Engineering Practice (CVEN3031) or Fundamentals of Humanitarian Engineering (ENGG3001)
Effective from 2021: Engineering Design & Professional Practice (DESN2000)
No
Yes
2020: CVEN2401
Effective from 2021: Sustainable Transport & Highway Engineering (CVEN3401)
No
No
2020: Engineering Design & Professional Practice (DESN2000) (CVEN2401 only for repeating students) and Sustainable Transport & Highway Engineering (CVEN3401) in 2021.
Effective from 2021: DESN2000 and CVEN3401
If you have not completed or failed any of the 'OLD COURSES' please ensure you enrol in the corresponding course on the right-hand side which is its equivalent for the purpose of meeting the requirements of your program.
OLD course
NEW equivalent courses
Communications in the Built Environment (BENV1010)
History of Design Thinking (BENV1015)
Engineering Computations for Environmental Engineers (CVEN2702)
Civil and Environmental Engineering Computations (CVEN2002)
CVEN3202 Soil Mechanics
CVEN2402 Transport Eng & Envir Sus
Transport Engineering & Environmental Sustainability (CVEN3402)
Sustainable Trans & Highway Engineering (CVEN3401)
CVEN3203 Applied Geotechnics & Eng Geology
CVEN3304 Concrete Structures
CVEN3303 Steel Structures
CVEN2303 Structural Analysis & Modelling
ENGG1300 Engineering Mechanics
ENGG2500 Fluid Mechanics for Engineers
ENGG2400 Mechanics of Solids
-
Specialisation
Old requirement
New requirement
Effective from
Refer to table below
Microprocessors & Interfacing (COMP2121)
Engineering Design & Professional Practice (DESN2000)
T1 2020 onwards
System Modelling and Design (COMP2111)*
Engineering Design & Professional Practice (DESN2000)
T1 2020 onwards
Students are not required to take DESN2000
If you are planning to take COMP2111 from 2020 onwards it will count as a Free Elective and you will still be required to complete DESN2000.
NOTE: Students who have already completed the Old Requirement are not permitted to complete DESN2000.
BINF6111 Completed?
BINF6112 Completed?
Courses left to complete
Yes
Yes
No Changes
Yes
No
2020: Computational Biology Engineering Design Workshop (BINF6112)
Effective from 2021: Consult Bruno GaetaNo
Yes
2020: Genome Informatics Engineering Design Workshop (BINF6111)
Effective from 2021: Consult Bruno GaetaNo
No
2020: Complete both BINF6111 AND BINF6112
Effective from 2021: BINF3020 and DESN2000OLD COURSE
NEW COURSE
EFFECTIVE TERM
COMP1917
S1,17 onwards
COMP3441 (UG) COMP9441 (PG)
Security Engineering and Cyber Security (COMP6441) and Extended Security Engineering and Cyber Security (COMP6841)
S1,17 onwards
COMP1927
S2,17 onwards
SENG1031
S2, 17 onwards
COMP2911
S1,18 onwards
-
Specialisation
Old requirement
New requirement
Effective from
ELEC2142
Engineering Design & Professional Practice (DESN2000)
T1 2020 onwards
ELEC2142
Engineering Design & Professional Practice (DESN2000)
T1 2020 onwards
Bachelor of Engineering (Honours)/Master of Engineering (Electrical Engineering)(3736)
ELEC2142
Engineering Design & Professional Practice (DESN2000)
T1 2020 onwards
NOTE: Students who have already completed the Old Requirement are not permitted to complete DESN2000.
Old course
Replaced with
TELE4120 Thesis - Part A
TELE4121 Thesis - Part B
PHTN4120 Thesis - Part A
PHTN4121 Thesis - Part B
TELE3117 Telecoms Design
Electrical Engineering Design (ELEC3117)
PHTN3117 Photonic Eng Design
TELE4123 Telecomms Design Proficiency
PHTN4123 Photonic Design Proficiency
-
Specialisation
Old requirement
New requirement
Effective from
MMAN2100
DESN2000 (prerequisite DESN1000 and MMAN1130)
T1 2020 onwards
MMAN3000
DESN3000
T1 2022 onwards
MMAN2100
DESN2000 (prerequisite DESN1000 and MMAN1130)
T1 2020 onwards
MMAN3000
DESN3000
T1 2022 onwards
MMAN2100
DESN2000 (prerequisite DESN1000 and MMAN1130)
T1 2020 onwards
MMAN3000
DESN3000
T1 2022 onwards
MMAN2100
DESN2000 (prerequisite DESN1000 and MMAN1130)
T1 2020 onwards
MMAN3000
DESN3000
T1 2022 onwards
NOTE: Students who have already completed the Old Requirement are not permitted to complete DESN2000 or DESN3000.
Old course
Replaced with
Comments
MMAN2130
Offered in T1, T2 and T3
MMAN1300
MMAN2400
MMAN2600
MANF4611*
Professional Elective
MTRN4110
Students enrolling in the final year of MTRN stream in 2023 must complete MTRN3100 in place of MTRN4110 during their 4th year. There will also be a limited number of spots for students entering their 3rd year of MTRN stream in 2023. The remaining 2023 3rd year MTRN students will complete MTRN3100 in T2 2024.
MMAN4010/
MMAN9001
Last offering in T3 2023
From 2024 onwards must enrol in Thesis A (Individual Thesis) MMAN4951/MMAN9451
MMAN4020/
MMAN9002
Last offering term will be T1 2024. From 2024 onwards must enrol in Thesis A (Individual Thesis) MMAN4951/MMAN9451
ENGG4841
Cancelled in 2023. MECH UG students can substitute with another disciplinary elective.
GSOE9841
Cancelled in 2023. MECH PG students can substitute with another ADKC course or ETM course to make up UOC required.
- *This only applies to Mechatronic Engineering (MTRNAH) students
Old course
Replaced with
Comments
MMAN2130
Offered in T1, T2 and T3
MMAN1300
MMAN2400
MMAN2600
MANF4611*
Professional Elective
*This only applies to Mechatronic Engineering (MTRNAH) students
2021 MANF stream changes
Course
Comments
Disestablished from 2021. Student with MANF3100 outstanding will take MANF4100 instead and then progress to MANF4150 the following year. Students who missed MANF3100 in T1 2020 due to COVID-19 are permitted to take MANF4100 and MANF4150 concurrently.
Will be offered instead of MANF3100 from 2021. MANF4100 and MANF3510 are pre-requisites
Course needs to be taken in Year 3 for 2021 commencing students
2021 MTRN stream changes
Course
Comments
From 2021 COMP1531 will replace COMP2121. COMP1531 is now the pre-requisite for MTRN2500 instead of COMP1511.
The term offering for this course is changing to T3 2021. Students graduating at the end of T2 2021 will need to attempt this course in T3 2020 so their progression is not compromised.
MTRNAH (Mechatronic Engineering) and Engineering (Honours)(Computer Science (3785)
Students enrolled in MTRN and 3785 will need to enrol in any Engineering Elective to compensate for 6 UOC COMP1531 that is already core in the Computer Science side.
- Minerals and Energy Resources Engineering
- Photovoltaic and Renewable Energy Engineering
-
Mining Engineering (MINEAH)
Mining Engineering (MINEAH) students will not be permitted to take DESN2000 in 2020 and students do not need to adjust their 2020 enrolment. From 2021 DESN2000 will be a core course and further information will be release in due course prior to 2021 Course Enrolment.
Old course
New equivalent courses
Effective from
MINE2010
DESN2000
From 2021 onwards
Petroleum Engineering (PETRAH)
Petroleum Engineering (PETRAH) students will not be permitted to take DESN2000 in 2020 and students do not need to adjust their 2020 enrolment. From 2021 DESN2000 will be a core course and further information will be release in due course prior to 2021 Course Enrolment.
Other transitional arrangements for Petroleum Engineering (PETRAH):
Old course
New equivalent courses
Effective from
PTRL1010, GEOS3321
PTRL1001
From 2016 onwards
PTRL2018
PTRL2020
From 2017 onwards
PTRL3003
PTRL2030
From 2017 onwards
PTRL3003,PTRL3002
PTRL3030
From 2017 onwards
PTRL3002
PTRL3040
From 2017 onwards
PTRL3023
PTRL3050
From 2017 onwards
PTRL3022
DESN2000
From 2021 onwards
Note: PTRL3022 will be offered in T3, 2021 for transitioning students.
-
Specialisation
Old Requirement
New Requirement
Effective from
SOLA2052
Engineering Design & Professional Practice (DESN2000)
T1 2020 onwards
SOLA2052
Engineering Design & Professional Practice (DESN2000)
T1 2020 onwards
NOTE: Students who have already completed the Old Requirement are not permitted to complete DESN2000.
From 2018 onwards, SOLA5054 will no longer be offered and students should refer to the table below to ensure you are enrolling in the correct course(s):
SOLA4012 completed?
SOLA5054 completed?
Course(s) left to complete
Yes
No
No
Yes
No
No
Yes
Yes
No changes
* Note – If you previously completed SOLA5057 as an elective. Recommendation – SOLA5057 is a substitution for SOLA5054, this means you have an elective left to complete.
** You will still need to complete SOLA4012, despite the current exclusion between SOLA4012 and SOLA5054. You should be able to enrol yourself via myUNSW.
If you experience any problem, please contact the Engineering Program Authority.